NEWS

Autodesk Teams Up with NASA’s Jet Propulsion Laboratory

Autodesk have announced a multi-year collaborative research project with the NASA Jet Propulsion Laboratory (JPL) to assists in the exploration of new approaches to design and manufacturing processes for space exploration, with the custom application of Autodesk’s generative design technology.

Mark Davis, the senior director of industry research at Autodesk commented: 'They were clear that they weren’t interested in incremental gains: if they were only able to improve performance by 10 per cent, they basically weren’t interested. If we could deliver software tools to help them achieve a performance improvement of 30 per cent or more, then we had their attention. This project demonstrates that Autodesk technologies may deliver mass savings at this level.'

Generative design is a relatively new design approach that uses machine intelligence and cloud computing to quickly generate a broad set of design solutions that fit within the specific constraints set by engineers. It enables design teams to explore a much wider design space while still being bound by manufacturing and performance requirements dictated by the team or environment.

A commercial form of generative design technology is available today in Fusion 360, Autodesk’s cloud-based product development platform. Davis and his team continue to develop more conceptual advanced versions of the software for use in experimental capacities, such as with JPL. 'We had developed a custom version of our software for high performance motorsports that enabled us to help our customers solve for multiple constraints at once. We then applied it to the problems JPL needed to consider,' Davis says. 'We took a system that was developed to help our customer solve system level suspension problems on a Formula One race car and applied new requirements for structural constraints critical to space exploration. This gave us a chance to push the capabilities of the software even further and help our customers solve even larger and more sophisticated problems.'

NASA JPL aim to desing a new landing vehicle that can be used for future space exploration missions. The concept lander was unveiled at Autodesk University on November 13th 2018 in Las Vegas. The fully-assembled lander measures approximately 2.5 meters across and 1 meter tall. An interplanetary lander needs to perform complicated operational functions in temperatures far below zero and withstand radiation levels thousands of times greater than on Earth. In space exploration, weight at liftoff is one of the most critical considerations. Every kilogram of mass that can be cut from the structural payload enables a critical increase in the scientific payload of sensors and instruments to search for life beyond earth.

Within the company, JPL’s Atelier division is the team charged with trying out new approaches and processes, then recommending the ones that hold promise to the teams working on specific missions. 'What they do is carefully infuse new technology into their processes,' says Karl Willis, Autodesk’s technology lead on the project. 'They know they have to explore new ways to do things while keeping risk at a minimum.'

Three different manufacturing methods—3D printing, CNC milling and casting—were used to fabricate the different parts of the lander. Generative design is often associated with 3D printing, also known as additive manufacturing, which is well-suited for the complex, organic-looking shapes that the software produces based on user specifications. But the software also gives users the ability to set constraints for their other manufacturing processes. 'We now have the ability to help our customers solve for their multiple manufacturing constraints simultaneously, which adds CNC machining and casting options in addition to 3D printing,' explains Davis. And while other software programs can optimise a single part for stiffness and weight, Autodesk’s generative design technology is unique in its ability to allow customers to take into consideration alternate design strategies and produce an entire array of viable solutions, rather than just a single optimised version.

For the lander project, the JPL team explored the use of experimental generative design technology for multiple structural components, including the internal structure that holds the scientific instruments, and the external structure that connects the lander legs to the main payload box. The team has been able reduce the mass of the external structure by 35 per cent compared with the baseline design that they started with.

A key benefit of generative design is that it enabled the JPL team to iterate their designs rapidly. 'As a design matures and new performance or environmental data comes in, generative design can enable our customers to create new designs quickly,' says Willis.

Most design teams typically take 2-4 months to turn around a revised design, he points out. Working with generative design, that process can take place in 2-4 weeks. 'That flexibility and speed to update an existing problem definition rather than starting from scratch, combined with the ability for customers to specify manufacturing constraints, make it a real paradigm shift for people designing these kinds of structures,' Willis added.

Creating a lander that can withstand the rigorous conditions of space across extreme distances is a massive challenge, and JPL’s designers are investigating and using every new technology at their disposal. For now, the application of generative design is still officially considered a developmental research project within JPL. But taking the seemingly impossible and making it possible is JPL’s specialty. Just as the computational power of mainframe computers helped the space program reach new heights in the 1960s, technologies like generative design are creating new possibilities in space exploration, enabling us to go further and learn more about our place in the universe.

Twitter icon
Google icon
Del.icio.us icon
Digg icon
LinkedIn icon
Reddit icon
e-mail icon
Feature

Robert Roe reports on developments in AI that are helping to shape the future of high performance computing technology at the International Supercomputing Conference

Feature

James Reinders is a parallel programming and HPC expert with more than 27 years’ experience working for Intel until his retirement in 2017. In this article Reinders gives his take on the use of roofline estimation as a tool for code optimisation in HPC

Feature

Sophia Ktori concludes her two-part series exploring the use of laboratory informatics software in regulated industries.

Feature

As storage technology adapts to changing HPC workloads, Robert Roe looks at the technologies that could help to enhance performance and accessibility of
storage in HPC

Feature

By using simulation software, road bike manufacturers can deliver higher performance products in less time and at a lower cost than previously achievable, as Keely Portway discovers